Sony VPL-GTZ380 Help Manual page 154

Help Guide
Data Projector
VPL-GTZ380
Reading the Indicator
Problems are indicated by lighting/flashing of the ON/STANDBY indicator and WARNING indicator located on the front of
the projector.
ON/STANDBY: Lights in red, WARNING: flashes in red
Number of flashes: Three times
The unit does not light properly due to an abnormality of the light source and light source power. Turn off, then turn on
the power after a while.
If the symptom persists, consult with qualified Sony personnel.
Number of flashes: Six times
The unit detected a drop impact.
If there is abnormality on the unit, consult with qualified Sony personnel. If there are no abnormalities on the unit,
disconnect the AC power cord and check that the ON/STANDBY indicator turns off, then connect the AC power cord to
turn the unit on.
Number of flashes: Eight times
The lens is not securely attached. Consult with qualified Sony personnel.
ON/STANDBY: Flashes in red, WARNING: flashes in red
Both flash simultaneously.
Number of flashes: Twice
The internal temperature is unusually high. Check to ensure that nothing is blocking the ventilation holes or the unit is not
being used at high altitudes.
Number of flashes: Three times
Cooling components, such as a cooling fan are damaged. Consult with qualified Sony personnel.
Note
If the indicator starts flashing in a way of other than the above and the symptom persists even after carrying out the above
methods, consult with qualified Sony personnel.
154