Table of Contents
Advertisement
Note
When the position has been selected and confirmed, the lens starts to move. Do not touch the lens and place anything near the
lens. Doing so may cause injury or malfunction.
If you press any button on the remote control or the control panel while the lens is moving, the lens stops. In that case, select the
position again or adjust the lens manually.
The Picture Position function is not guaranteed to reproduce the lens settings precisely.
When you use multiple screen aspect ratios using the lens zoom, set the projector within the range of the specified projection
distance in reference to the Projection distance list. Depending on the setting position, the range of the lens shift may be
restricted, even though the projector is set within the specified range.
Related Topic
Menu Operation: Picture Position
Menu Operation: Aspect
Menu Operation: Blanking
When Projecting in 1.90:1 (Native Full Display 17:9) Format
When Projecting in 1.78:1 (16:9) Format
When Projecting in 2.35:1 Format
5-023-481-14(1) Copyright 2020 Sony Corporation
44
Advertisement
Table of Contents
