Sony VPL-GTZ380 Help Manual page 88

Table of Contents

Help Guide

Data Projector

VPL-GTZ380

Menu Operation: 3D Settings > 2D-3D Display Sel.

You can configure 3D display settings.

Press the MENU button.

Select

[Function] - [3D Settings] - [2D-3D Display Sel.] - the desired setting.

Settings

When HDMI signal is input

[Auto]

3D images are displayed when HDMI signals with 3D information are input. 2D images are displayed when other signals

are input.

[3D]

3D images are displayed according to the 3D format selected in [3D Format]. However, when HDMI signals with 3D

information are input to the unit, 3D images are displayed according to the 3D format of those HDMI signals.

[3D Format]

When the input HDMI signals do not include 3D information, it sets the format to use for displaying the image in 3D.

[Side-by-Side]: Two similar 3D images are displayed side by side.

[Over-Under]: Two similar 3D images are displayed one above the other.

When DisplayPort 1/2 input is selected and 4k/120p signal is input

[2D]

Display in 2D.

[3D]

Display in 3D.

Hint

3D information is additional information to differentiate 3D. Some HDMI signals have additional information to differentiate 3D and

some HDMI signals have none.

You cannot set [2D-3D Display Sel.] to [3D] for some image sources. For available 3D signals, see "Compatible 3D Signals."

The simulated 3D feature may have limited effect depending on the screen size (100 to 120-inch screen is recommended) and

the image source.

The menu display may have a ghost image while a 3D image is displayed. In that case, operate the menu with the 3D glasses.