Sony VPL-GTZ380 Help Manual page 56

Table of Contents

Help Guide

Data Projector

VPL-GTZ380

Menu Operation: Cinema Black Pro > Laser Light Setting

You can adjust the brightness of the laser light.

Press the MENU button.

Select

[Picture] - [Cinema Black Pro] - [Laser Light Setting] - the desired setting.

Settings

[Dynamic Control]

You can change the range of the laser light.

[Full]: Automatically adjusts the laser light and signal processing according to the brightness level of the input source,

and optimizes the amount of light. This results in a dynamic image with light and high contrast.

[Limited]: Compared to [Full], it suppresses the laser light and brightness. This is suitable for viewing an image in a

dark room.

[Off]: Turns off the dynamic control function.

[Output]

Higher values lighten the image, while lower values darken the image.

Hint

Adjust [Output] according to the brightness of the image and select the setting under [Dynamic Control] to suit your taste.

You can also set [Output] with the LIGHT OUTPUT button on the remote control.