Table of Contents
Advertisement
Help Guide
Data Projector
VPL-GTZ380
Menu Operation: Panel Alignment
You can slightly adjust color shift on the text or image on the projection screen.
Press the MENU button.
1
Select
[Installation] - [Panel Alignment] - [On] or [Off].
2
The correction data has been preset for [Off].
When you select [On], adjust color shift by selecting [Adjust Item] and [Adjust Color].
3
Settings
[Adjust Item]
You can select the adjustment method from the following.
[Shift]: It shifts the whole image to make adjustments.
[Zone]: It specifies the desired range to make adjustments.
[Adjust Color]
It specifies the desired color to adjust color shift. Select [R] (Red) or [B] (Blue) to make adjustments based on [G]
(Green).
[Pattern Color]
When [Adjust Color] is [R] (Red), select [R/G] (Red and Green) or [R/G/B] (White, all colors).
When [Adjust Color] is [B] (Blue), select [B/G] (Blue and Green) or [R/G/B] (White, all colors).
[Adjust]
You can make the shift adjustment and zone adjustment of the color selected in [Adjust Color], with the
(Left/Right) and
/
When [Shift] is selected: Set the amount of adjustment for the horizontal direction (H) with the
button, and the vertical direction (V) with the
When [Zone] is selected: Select the desired horizontal position (H Position) with the
the desired vertical position (V Position) with the
Set the amount of adjustment for the horizontal direction (H) with the
direction (V) with the
You can select the desired position again by pressing the ENTER button.
(Up/Down) buttons.
/
(Up/Down) button.
/
(Up/Down) button on the shift adjustment screen.
/
(Up/Down) button. Then, press the ENTER button.
101
/
(Left/Right) button, and
/
(Left/Right) button, and the vertical
/
/
(Left/Right)
Advertisement
Table of Contents
