Sony VPL-GTZ380 Help Manual page 103

Table of Contents

Help Guide

Data Projector

VPL-GTZ380

Menu Operation: Network Setting

You can configure Internet protocol settings.

Press the MENU button.

Select

[Installation] - [Network Setting] - the desired setting.

Settings

[IPv4 Setting]

[IP Address Setup]: You can select the IP address setting method.

[Auto(DHCP)]: Network settings are automatically assigned by the DHCP server functions such as the router.

[Manual]: Network settings are configured manually. Select the desired item with the

and enter the value with the

When all items have been entered, select [Apply], then press the ENTER button. The entered settings are

applied.

[IP Address]: The IP address of the projector is set.

[Subnet Mask]: The subnet mask of the projector is set.

[Default Gateway]: The default gateway of the projector is set.

[MAC Address]: The MAC address of the projector is displayed. This cannot be changed.

[Apply]: It enables the IP address that has been set manually.

[IPv6 Information]

The IPv6 address information is displayed. Set the IPv6 address from a web browser.