Remote Control Does Not Work - Sony VPL-GTZ380 Help Manual

Help Guide
Data Projector
VPL-GTZ380

Remote control does not work.

Batteries could be weak. Replace the batteries with new ones.
Insert the batteries with the correct polarities of batteries.
If there is a light source near the remote control detector, the unit may malfunction.
Check the position of the remote control detector on the unit.
Set [IR Receiver] to [Front & Rear] in the
Make sure that the cable is not connected to the IR IN connector.
Related Topic
Inserting the Batteries into the Remote Control (RM-PJ29)
Inserting the Batteries into the Remote Control (RM-PJ24)
Parts and Controls (Main Unit)
Parts and Controls (Remote Control) (RM-PJ29)
Parts and Controls (Remote Control) (RM-PJ24)
Menu Operation: IR Receiver
Menu Operation: ID Mode
[Installation] menu.
5-023-481-14(1) Copyright 2020 Sony Corporation
168