Sony VPL-GTZ380 Help Manual page 76

Table of Contents

Help Guide

Data Projector

VPL-GTZ380

Menu Operation: Aspect

You can set the aspect ratio of the image to be projected for the current input signal.

Press the MENU button.

Select

[Screen] - [Aspect] - the desired setting.

Settings

[1.85:1 Zoom]

The 1.85:1 image is projected on the entire screen with the aspect ratio maintained so that black bands do not appear at

the top and bottom on the screen.

[2.35:1 Zoom]

The 2.35:1 image is projected on the entire screen with the aspect ratio maintained so that top and bottom black bands

become small. When you select [2.35:1 Zoom] under [Trigger Select] in the

output from the TRIGGER 1/TRIGGER 2 terminal.

[H Stretch]

The 16:9 image is projected on the entire 2.35:1 screen.

[Normal]

Input image is projected on the entire screen with the aspect ratio maintained. This is suitable for viewing 1.78:1 (16:9)

and 1.33:1 (4:3) images.

[V Stretch]

This is most suitable for viewing the 2.35:1 image on the 2.35:1 screen with a commercially available anamorphic lens.

When you select [V Stretch] under [Trigger Select] in the

TRIGGER 1/TRIGGER 2 terminal.

[Squeeze]

When you view the 1.78:1 (16:9) or 1.33:1 (4:3) image with a commercially available anamorphic lens, the image is

projected with the correct aspect ratio.

[Stretch]

The image squeezed to 1.33:1 (4:3) is projected with 1.78:1 (16:9) aspect ratio.

Hint

When you select [V Stretch] or [Squeeze], select the anamorphic lens type according to your anamorphic lens under [Anamorphic

Lens] in the

[Installation] menu.

Selectable aspect settings vary depending on an input signal.

When a computer signal is input, you cannot select the aspect settings.

The aspect setting is saved for each of the five Picture Positions. Select the Picture Position before adjusting the aspect. Final

adjusted values are saved automatically.

When [H Stretch] is selected, the aspect ratio of the input image will be landscape-oriented.