Sony VPL-GTZ380 Help Manual page 49

Table of Contents

Help Guide

Data Projector

VPL-GTZ380

Projecting a High Resolution Image (V Split Display)

Signals transferred after an image is split into two at "4096 × 2160" or "3840 × 2160" resolution are projected.

Connect the DisplayPort 1 input and DisplayPort 2 input on the projector to the DisplayPort 1 output and

DisplayPort 2 output on the workstation respectively.

Turn on the projector and workstation.

Select [DisplayPort 1/2] in the input selection window.

Select either "2048 × 2160" or "1920 × 2160" resolution in the setting screen on the workstation

Depending on the OS and/or graphic boards which are installed in the workstation, user operations on the setting screen differ. Consult

with the manufacturer of the workstation or graphic board.

Note

When you input signals to DisplayPort 1 and DisplayPort 2, make sure to input the synchronized signals which are output from

the same signal system, and input them in the same signal format.