Sony VPL-GTZ380 Help Manual page 23

6.
POSITION button
Stores and recalls lens settings.
7.
BLANK button
Temporarily turns off an image. Press again to release.
8.
BRIGHTNESS button
Adjusts the brightness of images.
LIGHT OUTPUT button
Adjusts the laser output from the light source.
CONTRAST button
Adjusts the contrast of images.
MOTIONFLOW button
Smoothly reproduces fast-moving images.
CONTRAST ENHANCER button
Automatically corrects images to optimize the contrast according to a scene.
REALITY CREATION button
Adjusts the definition of images and reduces the noise of images.
9.
ID MODE switch
Sets the ID mode of the remote control. If a different ID mode is assigned to each projector when multiple projectors
are used, you can operate only the projector with the same ID mode as that of the remote control.
10.
IR output terminal
Used as a wired remote control by connecting to the IR IN terminal on the unit with a cable (stereo mini plug (not
supplied)). You do not need to install batteries in the remote control.
Related Topic
Projecting Images
Adjusting the Position of the Projected Image
Using the Picture Position
Navigating Menus
5-023-481-14(1) Copyright 2020 Sony Corporation
23