Table of Contents
Advertisement
Help Guide
Data Projector
VPL-GTZ380
Setting Crestron Connected
You can change the control protocol settings of Crestron Connected on the [Crestron Connected] page in [Advanced
Settings].
Note
The entered value will not be applied until the [Apply] button is clicked.
Select [Advanced Settings] - [Crestron Connected] and display the [Crestron Connected] page.
1
Set each item and click the [Apply] button.
2
Settings
[Start Crestron Service]
Turn Crestron Service on or off. For details, refer to the Crestron Corporation product catalog and so on.
[IP Address]
Enter the IP address of the Crestron system server.
[IP ID(HEX)]
Enter the IP ID(HEX) of the CIP protocol.
[Port No.]
Enter the CIP protocol server port number. The factory default setting is "41794."
5-023-481-14(1) Copyright 2020 Sony Corporation
119
Advertisement
Table of Contents
