Item
Designator
10
P26, P27
11
J21
12
P20
13
P10
J36
16
SATA
22
XU1
23
J7,J8,J9,J10,J1
1,J12,J13,J14
25
P24
26
P21
27
P23
28
XU2
CAUTION: The TPM is not a customer-removable part.
Any attempt to remove an installed TPM from the system board breaks or disfigures the TPM security
rivet. Upon locating a broken or disfigured rivet on an installed TPM, administrators should consider
the system compromised and take appropriate measures to ensure the integrity of the system data.
If you suspect a TPM board failure, leave the TPM installed and remove the system board. Contact
an HP authorized service provider for a replacement system board and TPM board.
Jumpers – Password and Chassis ID
System board password (P20) chassis ID1(P26) and chassis ID2(P27) jumpers
Table 3 describes the jumper settings
Table 3 System configuration switch settings
Jumper
P20
P26
P27
Description
Chassis ID 0/1
Internal USB connector
Password jumper
18-pin front panel header
3-pin front panel header
SATA connectors
Processor 1 socket
Processor 1 DIMM slots
8-pin power connector
24-pin power connector
8-pin power connector
Processor 2 socket
Status
1-2, password enable
1-2, default setting
2-3, default setting
Contents 55