Jumpers - Password And Chassis Id - HP ProLiant SL170s G6 Maintenance And Service Manual

Item Designator
13 J10
J11
J12
J13
J14
J15
J16
J17
14 XU1
15 J36
16 J42
17 J1
J2
J3
J4
J5
J6
J7
J8
18 XU2
19 J45
20 J24
21 J57
CAUTION: The TPM is not a customer-removable part.
Any attempt to remove an installed TPM from the system board breaks or disfigures the TPM security
rivet. Upon locating a broken or disfigured rivet on an installed TPM, administrators should consider
the system compromised and take appropriate measures to ensure the integrity of the system data.
If you suspect a TPM board failure, leave the TPM installed and remove the system board. Contact
an HP authorized service provider for a replacement system board and TPM board.
Jumpers – password and chassis ID
Password (J50) and chassis ID (J45) jumpers
Table 4 System configuration switch settings
Jumper
J50
J45
J53
Description
Processor 2 DDR3 DIMM 8A slot
Processor 2 DDR3 DIMM 7D slot
Processor 2 DDR3 DIMM 6G slot
Processor 2 DDR3 DIMM 5B slot
Processor 2 DDR3 DIMM 4E slot
Processor 2 DDR3 DIMM 3H slot
Processor 2 DDR3 DIMM 2C slot
Processor 2 DDR3 DIMM 1F slot
Processor 1 socket
Power connector
RPS connector
Processor 1 DDR3 DIMM 8A slot
Processor 1 DDR3 DIMM 7D slot
Processor 1 DDR3 DIMM 6G slot
Processor 1 DDR3 DIMM 5B slot
Processor 1 DDR3 DIMM 4E slot
Processor 1 DDR3 DIMM 3H slot
Processor 1 DDR3 DIMM 2C slot
Processor 1 DDR3 DIMM 1F slot
Processor 2 socket
Protected RTC jumper
PCIe connector
TPM connector
Status
1-2, password reset
1-2, default setting, 2-3 clear CMOS
1-2, BMC reset
Connectors, switches, and LEDs 58