System Board Removal And Replacement Procedure - HP ProLiant DL170h G6 Maintenance And Service Manual

Figure 35 Replacing the battery

System Board Removal and Replacement Procedure

To remove the system board:
Remove the top two Nodes first:
Remove screws from the rear panel and side of the tray.
1.
Slide the tray with system board back, up and out of the chassis.
2.
Figure 36 Removing the tray with system board
Remove the six screws that secure the system board to the tray.
3.
Release the system board from the tray.
4.
All manuals and user guides at all-guides.com
Removal and Replacement Procedures 53