HP ProLiant DL170h G6 Maintenance And Service Manual page 74

•
Set boot features:
○
Enable or Disable POST Speed up.
○
Enable or Disable Bootup Num-Lock.
○
Set restore on AC power loss options, such as last state, power off, and power on.
○
If BIOS displays an error message, set POST F1 Prompt for selections, such as delayed,
enabled, or disabled.
Advanced Menu
Figure 59 Advanced menu of the BIOS setup utility 1
WARNING: Incorrect settings may cause the server to malfunction. To correct the settings, press F9
key to restore the default settings.
•
CPU Configuration – Configure and view the current CPU configuration and settings.
•
IDE Configuration – Use this screen to select options for the IDE Configuration Settings.
•
IO Device Configuration – Configure the serial port settings of the server.
•
ACPI Configuration – Use this screen to select options for the ACPI Configuration settings.
•
IPMI Configuration – Configure the Intelligent Platform Management Interface (IPMI) settings.
•
USB Configuration --- Configure the USB settings of the server.
•
Remote Access Configuration – Select console redirection in the left frame of the screen to go to
the sub menu for that item. Console redirection Setup options are described in this section.
•
PCI BUS Configuration –Use this screen to select options for PCI Express Devices.
•
Power Configuration –Use this screen to select options for the Power Configuration.
All manuals and user guides at all-guides.com
Diagnostic tools and Setup Utilities 74