HP ProLiant DL170h G6 Maintenance And Service Manual page 48

All manuals and user guides at all-guides.com
To remove the IPMI optional card from the top system board
1 Loose the screws that secure the IPMI card to the chassis.
2 Remove the screws that secure the tray to the chassis and slide the tray with system board back,
up and out of the chassis.
3 Pull the IPMI card up to release it from the connector.
Figure 26 Removing the IPMI card from the top system board
To remove the IPMI optional card from the bottom system board:
1 Loose the screws that secure the IPMI card to the chassis.
2 Pull the IPMI card up to release it from the connector.
Figure 27 Removing the IPMI card from the bottom system board
To install the IPMI card to the bottom system board
Align the IPMI card with the open expansion slot and press the IPMI card straight down into the
1.
expansion connector on the system board.
Removal and Replacement Procedures 48