Power Supply Unit (Psu) - HP ProLiant DL170h G6 Maintenance And Service Manual

Figure 41 Installing the tray with system board into the chassis

Power Supply Unit (PSU)

Located on the rear panel of the server power supply is a standard auto ranging 1200 watt PSU with
PFC (power factor correction) function.
Figure 42 Power supply uinit
WARNING: Take note of the following reminders to reduce the risk of personal injury from electric
shock hazards and/or damage to the equipment.
•
Installation of power supply units should be referred to individuals who are qualified to service server
systems and are trained to deal with equipment capable of generating hazardous energy levels.
•
DO NOT open the power supply unit. There are no serviceable parts inside it.
To remove the power supply:
Press the wine colored handle.
1.
Slide the power supply out of the power supply bay.
2.
All manuals and user guides at all-guides.com
Removal and Replacement Procedures 56