All manuals and user guides at all-guides.com
Figure 10 Removing the drives
Remove the top cover.
1.
Remove the backplane.
2.
Remove all cables.
a.
Remove the two screws that secure the backplane to the hard drive cage.
b.
Pull the backplane out to release it from the hard drive cage.
c.
Figure 11 Removing the backplane
To install the backplane:
Orient the backplane so that the three notches on the board align with the three hooks on the
1.
drive cage and press the board down until it clicks into place.
Secure the backplane with two screws.
2.
Install all cables.
3.
Removal and Replacement Procedures 38