System Board Removal And Replacement Procedure - HP ProLiant SL170s G6 Maintenance And Service Manual
Hide thumbs
Also See for ProLiant SL170s G6:
- User manual (7 pages) ,
- Implementation manual (26 pages) ,
- Overview (20 pages)
Table of Contents
Advertisement
Figure 29
Replacing the battery
System board removal and replacement procedure
To remove the system board:
NOTE:
The system board spare part kit does not contain processors or DIMMs. These have to be
moved from the defective board and installed on the new board. Follow directions on the removal
and replacement of these parts.
Remove the six screws that secure the system board to the tray.
1.
Release the system board from the tray.
2.
Figure 30
Removing the system board
IMPORTANT:
them for future use.
Do not discard the screws. If the system board is removed in the future, you must keep
Removal and replacement procedures 48
Advertisement
Table of Contents
