System Board Removal And Replacement Procedure - HP proliant DL160SE G6 Maintenance And Service Manual

Figure 70
Removing the BBWC Assembly
To reinstall the BBWC assembly:
Align the locking tabs on the BBWC assembly to their holes on the tray.
1.
Press the BBWC assembly into the tray, and then push it along the direction of the arrow to lock
2.
the locking tabs.
Figure 71
Reinstalling the BBWC Assembly

System board removal and replacement procedure

To remove the system board:
Remove the top cover.
1.
Remove the air baffle and all cables from the system board.
2.
Loosen the nine screws that secure the system board to the chassis.
3.
Removal and replacement procedures 81