1 Introduction
Note
The unchanged signal frequency of the sensor element is output at the HF
output.
24
The LF output transmits this HF frequency with a variable scaling factor (chapter
4.3.3.1 Volume / Meters).
1.4.2.
Turbine meters from RMG are equipped with connecting flanges. For a secure con-
nection, the connection dimensions of the flanges of the pipelines to be connected
must match the connection dimensions of the flanges of the device.
ANSI pressure levels: flange connection dimensions correspond to the
•
standard ASME B 16.5.
DIN pressure levels: flange connection dimensions correspond to the
•
standard DIN EN 1092.
MANUAL TME400-VCF · EN08 · July, 01
Integrating the turbine meter into the pipeline
st
2021