Volume Jumps - Elan VC VSE2 Manual

ELAN

Volume Jumps

VOLUME JUMPS occur when volume level changes more than
one step. VOLUME JUMPS can be Fast Ramping (Default - 30ms
between steps), Slow Ramping (50ms between steps),
or Instantaneous.
To set VOLUME JUMPS for a particular VSE2:
1. Open VIA!TOOLS and follow the steps listed above to
navigate to the "VSE CONFIG" file.
2. Press and hold the MUTE button.
3. While continuing to hold the MUTE button, select the "Fast
Ramp", "Slow Ramp", or "Instant Jumps" command then
click on "Test IR".
4. When the POWER SENSE LED starts to blink, the VOLUME
JUMP is set.
© 2013 Core Brands, LLC. • All rights reserved.
INSTALLATION MANUAL
Page 31