Elan VC VSE2 Manual page 6

INSTALLATION MANUAL ELAN
• High-Power Capability: Handles up to 100 Watts/channel RMS.
• Override: Allows Page/Doorbell signals to override the music at
a preset level even with volume turned all the way down or with the
VSE2 in Mute.
• Impedance Matching (1X/2X/4X/8X): Allows multiple speaker
pairs to be connected to a single pair of amplifier channels.
• IR In/Out: A built-in IR receiver allows the VSE2 to be controlled
from universal remotes, keypads, VIA! Color LCD Touch Screen, or
outboard IR receivers. IR can be sent to the VSE2 using an IR
emitter or through the RJ45 jack on the rear of the unit. IR can
be sent from the IR output to source equipment, IR distribution
networks or whole-house controllers.
• Sense Input: This option determines if a High to Low level
transition on the Sense Input mutes the VSE2's volume. When
voltage drops to a Low level, the VSE2 mutes. The transition to
High voltage level DOES NOT un-mute the VSE2, however. A
physical button press is required to un-mute this device. This
allows the system or zone to be turned on without all of the VSE2s
in the system playing audio. Each VSE2 will turn on when the Zone
or System turns on, but they will all be muted.
When connecting to ELAN S6, S8.6, or S12 systems, the Sense
Input feature can be used for either zone-specific or systemwide
detection. ELAN Z•systems provide system On/Off detection only.
This feature can be disabled.
Page 4
© 2013 Core Brands, LLC. • All rights reserved.