INSTALLATION MANUAL
Symptom
No audio
present
Poor audio
quality
Page 40
Possible Cause
1. Source not
playing
2. Volume Muted
or turned all the
way down
3. Amplifier/
Speaker con-
nectors reversed
4. Speakers in
room miswired or
defective.
1. Clipping or
distortion
2. Speakers out of
phase
3.Incorrect
Impedance Match
settings
4. Incorrect assign-
ment of left/right
source RCA cables
or speaker cables
© 2013 Core Brands, LLC. • All rights reserved.
Solution
Press Play, turn ON
etc.
Increase volume
Check and correct
connections.
a. Test speaker at back
of amplifier.
b.Verify connections
Reduce Receiver/
Amplifier level
Carefully check polarity
of each speaker
See Imp. Match
Section starting on
pg.35 and set switches
correctly
Isolate to source or
room and correct
ELAN