Table of Contents
Advertisement
Put the shelf between the guide bars of
the shelf support.
Tray:
Do not push the baking tray
all the way to the back wall
of the cavity. This prevents
the heat from circulating
around the tray. The food
may be burnt, especially in
the rear part of the tray.
Push the tray or deep pan between the
guide bars of the shelf support. Make
sure it does not touch the back wall of
the oven.
11.2 Telescopic runners
You can install telescopic
runners on different shelf
levels, except level 4.
Installing the telescopic
runners
1. Turn the telescopic runner by
approximately 90°.
2. Slide the catch on the rear end of the
telescopic runner onto a shelf
support rail. Make sure that you put
the runner on the correct side of the
oven.
3. Turn the runner to the correct
position. The stop element that is at
one end of the telescopic runner
must point up.
4. Push the runner all the way to the
rear wall of the oven.
5. Push the front end of the telescopic
runner against the shelf support rail.
There is a click when the catch on
the front end engages correctly.
6. Do the same steps to install the
second telescopic runner. Make sure
that the two telescopic runners are
on the same level.
Removing the telescopic
runners
1. Press and hold the catch on the front
end of the telescopic runner.
2
2. Pull the front end of the runner away
from the shelf support.
3. Turn the telescopic runner by
approximately 90°.
4. Remove the rear end of the runner
from the shelf support.
5. Do the same steps to remove the
second telescopic runner.
ENGLISH
17
1 cm
1
Advertisement
Table of Contents
