3.2.3
Install Yocto 3.0 Software
Firstly, burn image to microSD card and instruction as below. If you already have the
microSD card with Yocto image, you can go to the second part directly.
1.
Prepare the Linux environment that can use "uncompress" and "dd" command.
(Below uses ubuntu 18.04 as example.)
2.
Use "tar Jxvf filename" to uncompress the file to img format.
3.
Use "sudo dd if=imgfile of=SDpartition" to burn the img file to your microSD
card. (Note: You should check which partition is your microSD card firstly.)
Second, after image is put into microSD card, use microSD card to update the image.
1.
Remove the screws from back cover. Due to COM port cover need to put down,
then slide up.
19
TPC-100W Series User Manual