Battery Replacement For The Remote Control - Sandstrom SWALKB14E Instruction Manual

Battery Replacement for the Remote Control

The remote control requires a CR2025, 3V Lithium battery.
1. Lift up the battery compartment cover with a
thin head tool.
GB
2. Remove the old battery with a thin head tool.
3. Replace with a new battery. Place the battery
compartment cover back to the remote
control.
Handling the Battery
• Improper or incorrect use of batteries may cause corrosion or battery leakage, which could cause fire,
personal injury or damage to property.
• Install the battery correctly by following the polarity (+ and –) indications in the battery compartment.
• Use only the battery type indicated in this manual.
• Do not dispose of the used battery as domestic waste. Dispose of it in accordance with local
regulations.
• Small button cell batteries such as the one used in the remote control are easily swallowed by young
children and this is dangerous. Keep loose button cells away from young children and make sure that
the battery is secure in the remote control. Seek medical advice if you believe a battery cell has been
swallowed.
Handling the Remote Control
• Take care of your fingernails when replacing the battery.
• Do not drop the remote control.
• Do not allow anything to impact the remote control.
• Do not spill water or liquid on the remote control.
• Do not place the remote control on a wet object.
• Remove the battery from the remote control when not in use for a long period of time, as corrosion or
battery leakage may occur and result in physical injury, and/or property damage, and/or fire.
• When the battery is exhausted, the remote control will not function.
14