Remove The Plastic Strip From The Remote Control; Battery Replacement For The Remote Control - Sandstrom SSDKBT13 Instruction Manual

Remove the Plastic Strip from the Remote Control

Remove the plastic strip from the battery if the battery is
being used for the first time. It is located at the bottom rear
of the remote control.

Battery Replacement for the Remote Control

The remote control requires a CR2025, 3V Lithium battery.
1. Slide and hold the battery release tab in the
direction of the arrow.
2. Pull out the battery holder and remove the old
battery.
3. Replace with a new battery.
4. Insert the battery holder back into the remote
control.
Handling the Battery
• Improper or incorrect use of batteries may cause corrosion or battery leakage, which could cause
fire, personal injury or damage to property.
• Install the battery correctly in the battery compartment. Normally the battery's positive polarity (+)
will face up.
• Use only the battery type indicated in this manual.
• Do not dispose of the used battery as domestic waste. Dispose of it in accordance with local
regulations.
• Small button cell batteries such as the one used in the remote control are easily swallowed by young
children and this is dangerous. Keep loose button cells away from young children and make sure
that the battery is secure in the remote control. Seek medical advice if you believe a battery cell has
been swallowed.
8