Truma CP plus Operating Instructions Manual page 10

Example:
Set room temperature 74 °F;
AC SET = 2 °F
Setpoint value for air condi-
tioning system = 76 °F
Fig. 24
Presetting: +2 °F (+1 °C).
3. ACC
(Only available if the air conditioning system
and furnace are connected)
The automatic climate control function AUTO is
activated or blocked with "ACC".
ON – The automatic climate control function AUTO is ac-
tivated. Automatic climate control function AUTO
can be selected in the Room temperature menu.
– "AC SET" appears in the Service menu.
OFF – The automatic climate control function AUTO is
blocked.
Fig. 25
Presetting: OFF
The function of the Truma automatic climate
control depends on proper installation.
4. °C / °F temperature display
• Select temperature display °C (Celsius) or
°F (Fahrenheit).
Fig. 17
Default setting: °C (Celsius).
5. Change backlighting
Change the backlighting of the CP plus in
10 increments.
Fig. 18
10
hot
6. 12 h / 24 h Mode
Display in 12 h (a. m., p. m.) / 24 h mode.
Fig. 19
Default setting: 24 h mode
7. Change language
• Select the desired language (German, Eng-
lish, French, Italian).
Fig. 20
Default setting: English
8. Show the version number
Display the version number of the Combi (D)
and CP plus .
Example:
H 1.20.01 –> H = appliance;
1.20.01 = Version number
Appliance
C =
F =
H =
Fig. 21
9. RESET
The reset function resets the CP plus to the
factory settings. All your settings are deleted.
Newly connected devices are recognized and
recorded in the control panel.
Reset
• Select "RESET" with the rotary push
button (Fig. 1 – 8).
• Tap the rotary push button.
• "PR SET" is shown in the display.
• Tap the rotary push button to confirm.
hot
CP plus
CP plus CI-BUS
Combi (D)