Settings - Samsung NV75T9979CD User & Installation Manual

Operations
Drain
After using the steam assisted modes, you must drain the remaining water to
prevent affecting other cooking modes. Also, if you want to drain again for
cleaning purposes, use this function.
1. Touch the button on the control panel, and then tap Cleaning.
2. Tap Drain and then Start.
3. Follow the instruction on the screen, and then tap OK.
• The oven drains water from the steam generator to the water reservoir.
4. When draining is complete, empty the water reservoir.
• After emptying the reservoir, clean it before putting it back to the oven.
WARNING
• Wear oven gloves when you handle the water reservoir.
• Do not remove the water reservoir while draining.
NOTE
Once the oven starts draining, please wait until the draining cycle is complete.

Settings

Touch the button on the control panel, and then tap Settings to change various
settings for your oven. Please refer to the following table for detailed descriptions.
Menu Submenu
Wi-Fi
Easy Connection
Connections
Remote
management
30 English
NV75T9979CD_SW_DG68-01191G-01_DE+FR+IT+EN.indb 30 NV75T9979CD_SW_DG68-01191G-01_DE+FR+IT+EN.indb 30
Description
You can turn the Wi-Fi on or off and connect to
a Wi-Fi network.
You can connect the oven to the SmartThings
server via a Wi-Fi connection. When the oven
is connected, you can use the SmartThings app
to check the status of the oven and/or control
it from a mobile device.
Tap Activate to allow the Call Centre to
access your oven remotely to check internal
information.
Menu Submenu
You can change the brightness of the display
Brightness
screen.
You can turn the screen saver on or off.
NOTE
Screen saver
The Screen saver is a function that displays the
date and time on your touch screen if there is
no input for a certain time in standby status.
Clock theme You can select the clock theme.
Display
You can set the length of time before the
screen saver turns on.
NOTE
• Energy consumption may increase
Timeout
depending on your setting.
• When the timeout setting is set to
"Always on", the brightness of the LCD
automatically changes to level 2 if there is
no action for 3 minutes.
You can turn on or turn off to update time from
Automatic date
the Internet. You must be connected to the Wi-
and time
Fi network.
You can select the time zone. (You must disable
Select time zone
Automatic date and time.)
Date & time You can manually set a date. (You must disable
Set date
Automatic date and time.)
You can manually set time. (You must disable
Set time
Automatic date and time.)
Select time You can select the time format from 12-hour or
format 24-hour format.
Language You can select a language.
Description
2021-05-28 오전 9:41:31 2021-05-28 오전 9:41:31