Table of Contents
Advertisement
5.6 Security
Use this menu to configure the security settings.
Administrator Password
Use this feature to set the administrator password which is required to enter the BIOS setup
utility. The length of the password should be from three to 20 characters long.
Password Check
Select Setup for the system to check for a password at Setup. Select Always for the system
to check for a password at boot up or upon entering the BIOS Setup utility. The options are
Setup and Always.
Hard Drive Security Frozen
Use this feature to enable or disable the Security Frozen command to SATA and NVMe
devices. The options are Enable and Disable.
Secure Boot
System Mode
Secure Boot
Select Enable for secure boot support to ensure system security at boot up. The options
are Disabled and Enabled.
99
Chapter 5: UEFI BIOS
Advertisement
Table of Contents
