Supermicro SuperServer E403-9D-4C-FRDN13+ User Manual page 59

IPMI Share LAN Enable/Disable
Set the JBM1 jumper to enabled to share i210 LAN with IPMI.
IPMI Dedicated/Share LAN Enable/Disable
Use JBM2 to enable or disable the dedicated IPMI LAN port. Refer to the table below for
jumper settings.
USB Wake Up
Use the JPUSB1 jumper to enable system wake up via a USB device. This jumper allows
you to wake up the system by pressing a key on the USB keyboard or by clicking the USB
mouse of your system. The JPUSB1 jumper is used together with the USB Wake Up function
in the BIOS. Enable both the jumper and the BIOS setting to activate this function. When
the USB Wake Up function is enabled, it will be active on all USB ports. Refer to the table
below for jumper settings.
IPMI Share LAN Enable/Disable
Jumper Settings
Jumper Setting Definition
Pins 1-2 (Open) Enabled (Default)
Pins 1-2 (Short) Disabled
IPMI Dedicated/Share LAN
Enable/Disable
Jumper Settings
Jumper Setting Definition
Pins 1-2 (Open) Enabled (Default)
Pins 1-2 (Short) Disabled
USB Wake Up
Jumper Settings
Jumper Setting Definition
Pins 1-2 Enabled (Default)
Pins 2-3 Disabled
59
Chapter 3: Motherboard Connections