Supermicro SuperServer E403-9D-4C-FRDN13+ User Manual page 97

Chapter 5: UEFI BIOS
Gateway IP Address
This feature displays the Gateway IP address for this computer. This should be in decimal
and in dotted quad form (i.e., 192.168.10.253).
VLAN
This feature is configurable if the Update IPMI LAN Configuration feature is set to Yes.
Use this feature to enable or disable the IPMI VLAN function. The options are Disable
and Enable.
*If the feature above is set to Enabled, the VLAN ID feature below is available for
configuration:
VLAN ID
Use this feature to select a value for VLAN ID.
Configure IPV6 support
IPV6 Support
Use this feature to enable IPV6 support. The options are Enabled and Disabled.
Configuration Address Source
Use this feature to select the source of the IP address for this computer. If Static is selected,
you will need to know the IP address of this computer and enter it to the system manually in
the field. If DHCP is selected, the BIOS will search for a DHCP (Dynamic Host Configuration
Protocol) server in the network that is attached to and request the next available IP address
for this computer. The options are Unspecified, Static, and DHCP.
*If the feature above is set to Static, the Station IP Address/Prefix Length/IPV6 Router1
IP Address features are available for configuration:
Station IPV6 Address
Use this feature to enter the IPV6 address.
Prefix Length
Use this feature to change the prefix length.
IPV6 Router1 IP Address
Use this feature to change the IPV6 Router1 IP address.
IPMI Extended Instruction
Use this feature to enable IPMI extended function support. The options are Enabled and
Disabled. When Disabled, the system powers on quickly by removing BIOS support for
97