Advertisement
Quick Links
We appreciate your purchase of TAKEX ame sensor.
Please read this instruction manual carefully for correct and effective use.
This sensor is designed to detect ames and to initiate an alarm, it is not a re-preventing device.
TAKEX is not responsible for damage, injury or losses caused by accident, theft, Acts of God (Including inductive surge by lightning), abuse,
misuse, abnormal usage, faulty installation or improper maintenance.
This sensor detects Ultraviolet rays in the ames and initiates an alarm.
It does not detect smoke, heat.
PRODUCT DESCRIPTION
Flame sensor FS-1000E is designed to detect ultraviolet rays contained in ames, and to initiate an alarm.
This sensor can be operated for 2years with popular type-AA alkaline battery 2 pcs.
Also, by wiring, external power supply (9V DC〜30V DC) is available.
The equipped output terminal enables remote control of other warning devices, and system operation with a
control panel.
Easy separation of the sensor unit and the base unit is very useful for simplifying installation and maintenance.
1
PARTS DESCRIPTION
Wiring hole
Detection window
Buzzer (Built-in)
FLAME SENSOR
FS-1000E
Instruction Manual
Knockout
Wiring hole
【SENSOR UNIT】
■ACCESSORY
Battery case for type-AA
(1 piece)
※Type-AA battery is not included
Locking screw hole
Terminals
【BASE UNIT】
Front mark
Battery cover
LED
Sensor locking screw
Tapping screw
φ
φ
3×6 (1 piece)
4×25 (2 pcs.)
Release lever
Wiring hole
Battery connector
Mode selector
Advertisement
Related Manuals for Takex FS-1000E
Summary of Contents for Takex FS-1000E
- Page 1 This sensor is designed to detect ames and to initiate an alarm, it is not a re-preventing device. TAKEX is not responsible for damage, injury or losses caused by accident, theft, Acts of God (Including inductive surge by lightning), abuse, misuse, abnormal usage, faulty installation or improper maintenance.
-
Page 2: Do's And Don'ts
Intense ames such as gas explosion's may damage the ● TAKEX is not responsible for damage, injury or losses by sensor, and there may be no detection. accident, calamity, Acts of God (including inductive surge by lightning), abuse, misuse, abnormal usage, faulty installation or improper maintenance. -
Page 3: Installation
WIRING Wiring is not necessary if power is supplied from battery and external output is not used. Terminal arrangement How to use Input / Output ①Power input (terminal (1), (2)) Do not use with battery at same time. Power input (with polarity) ●... -
Page 4: Operation And Function
(Factory set : 1 sec.) In case of uncertain operation on the above ● 15 sec. FS-1000E is equipped with 3 functions which can be used according to the application or environment. Fire detection in an area that may be ●... -
Page 5: Detection Area
33' (10m) TROUBLESHOOTING Solve possible problems according to the following table . If normal operations can not be restored by these corrective actios, contact either the dealer from whom you bought the unit or TAKEX. Corrective action Trouble Check No battery connected Connect battery ●... -
Page 6: External Dimensions
Sensor locking screw φ3 to 12 months from original date of shipment. During the Warranty Period, ● × × TAKEX will repair or replace, at its sole option, free of charge, any defective Tapping screw φ4 ● × × parts returned prepaid. Please provide the model number of the products, Ceiling/wall mount attachment BCW-401 original date of shipment and nature of dif culty being experienced.