Advertisement
Quick Links
We appreciate your purchase of TAKEX flame sensor.
Please read this instruction manual carefully for correct and effective use.
This sensor is designed to detect flames and to initiate an alarm; it is not a fire-preventing device.
TAKEX is not responsible for damage, injury or losses caused by accident, theft, Acts of God (including inductive surge by lightning), abuse,
misuse, abnormal usage, faulty installation or improper maintenance.
This sensor detects ultraviolet rays in the flames and initiates an alarm.
It does not detect smoke, heat.
φ
Message can be chosen from Japanese, English, Chinese, Korean, Spanish.
DC power by wire or battery (Batteries are not included.)
φ
Advertisement
Related Manuals for Takex FS-3500E
Summary of Contents for Takex FS-3500E
- Page 1 This sensor is designed to detect flames and to initiate an alarm; it is not a fire-preventing device. TAKEX is not responsible for damage, injury or losses caused by accident, theft, Acts of God (including inductive surge by lightning), abuse, misuse, abnormal usage, faulty installation or improper maintenance.
- Page 2 If this is ignored, people could face the possibility of death or serious injury. If this is ignored, people may suffer injury or personal property may suffer damages. This icon indicates actions to be avoided. This icon indicates instructions that should be strictly followed. Do not modify the unit, it may cause fire or Do not touch the unit with wet hand.
- Page 3 This sensor is designed to detect ultraviolet rays in flames, and to output a warning message. This unit is neither fire detector nor heat detector nor smoke detector. TAKEX is not responsible for damage, injury or losses by fire, accident, calamity, Acts of God (Including inductive surge by lightning), abuse, misuse, abnormal usage, faulty installation or improper maintenance.
- Page 4 Locate the installation site Arrange power supply by wire or battery. Slide the release lever to detach * Factory set: Battery case wire is already connected to the unit. (Batteries are not the sensor unit from the base. included.) (1) Pull the battery case out from main unit. Keep the wire connected. (2) Insert the battery into battery case with the correct polarity and confirm the buzzer sound.
- Page 5 Choose message language, set detection timer and detection sensitivity and adjust message volume. This product is equipped with installation holes Attach the sensor unit to base unit. (Pitch 3.29" or 83.5mm) to make installation easy (1) Turn front marks of base unit and sensor unit to and sensor's direction adjustable.
- Page 6 Message can be chosen among Japanese, English, Chinese, Korean, Spanish, or just buzzer sound. (Approx. 10 sec.). Only chosen message by dip switch will be announced. When no message chosen, only buzzer sound will be announced. The order of anouncement is Japanese (Non-smoking) or (Fire prohibition) modes are available.
- Page 7 The following setting is necessary for detection performance. Read carefully to make appropriate setting. This unit detects ultraviolet rays in a flame and issues a signal. In the semi-outdoors, there are many objects which generate ultraviolet rays and because there are no walls or windows in open area, there is a much higher possibility for the unit to detect those objects, in comparison with indoor installations.
- Page 8 φ φ ここは火気厳禁です。火気の使用はお断りいたします。 TAKEX products are warranted to be free from defects in material and workmanship for 12 months from original date of shipment. Our warranty does not cover damage or failure caused by Acts of God (including inductive surge by lightning), abuse, misuse, abnormal usage, faulty installation, improper maintenance or any repairs other than those provided by TAKEX.