Table of Contents
Advertisement
Installing / Mounting
SITRANS F flowmeters are suitable for in- and outdoor installations.
● Make sure that pressure and temperature specifications indicated on the device type
4.1
Use according to specifications
Instrument safety standards
The device meets the safety criteria defined in the Pressure Equipment Directive (PED). It
has been tested at the factory, based on the safety requirements. In order to maintain this
condition over the expected life of the device the requirements described in these Operating
Instructions must be observed.
The device satisfies the EMC-Requirements per EN61326 / NAMUR NE21 and the Low
Voltage Directive EN61010-1.
Use according to specifications covers:
● Use within technical limits.
● Consideration of liquid specifications and references.
● Consideration of specifications as to installation, commissioning and maintenance.
● Allowed pressure and temperature must be ≤ the pressure and temperature
● Flow and density must be within the specified limits
Do NOT:
● Use the meter as elastic equalization in pipe systems to compensate for e.g. pipe
● Use the meter as footboard for installation purposes.
SITRANS F C MC2
Operating Instructions, 10/2009, A5E02154544-02
plate / label will not be exceeded.
WARNING
Installation in hazardous location
Special requirements apply to the location and interconnection of sensor and
transmitter. See "Installation in hazardous area" (Page 8)
specifications stated on the product label.
displacement, pipe vibration, expansion etc.
4
15
Advertisement
Table of Contents
