Table of Contents
Advertisement
Introduction
These instructions contain all the information you need for using the device.
The instructions are aimed at persons mechanically installing the device, connecting it
electronically, configuring the parameters and commissioning it as well as service and
maintenance engineers.
Note
It is the responsibility of the customer that the instructions and directions provided in the
manual are read, understood and followed by the relevant personnel before installing the
device.
1.1
Items supplied
● MC2 sensor
● Sensorprom
● Calibration report
● Quick Start
● CD-ROM
1.2
History
This document describes:
● SITRANS F C MC2
● SITRANS F C MC2 Hygienic
Documentation history
The contents of these instructions are regularly reviewed and corrections are included in
subsequent editions. We welcome all suggestions for improvement.
The following table shows the most important changes in the documentation compared to
each previous edition.
Edition
10/2009
05/2008
01/2006
SITRANS F C MC2
Operating Instructions, 10/2009, A5E02154544-02
Remarks
Updated information on electrical connections
First edition of operating instructions for SITRANS F C MC2 and SITRANS F C MC2
Hygienic.
Manual supplement for SITRANS F C MC1
1
5
Advertisement
Table of Contents
