Feeding Envelopes - Pitney Bowes SendPro C Auto Quick Start Manual

1. Push the tape lever to the right and hold it there (a). Drop a stack of strip tapes down into the slot
(b). Make sure that the printable side faces to the right (toward the touchscreen).
2. Tap Envelope Printing or Print on Envelopes on the Home screen.
3. Select the postage mode and settings (account, class and special service, weight).
4. For a single tape, tap Tape. The default value is set to 1 tape.
For multiple tapes, tap the number on the tape field and use the keypad to enter the number
l
of tapes.

Feeding envelopes

Your SendPro C Auto can automatically feed a stack of envelopes.
Before you begin
All envelopes in a single stack must be the same width and thickness.
l
All envelopes in a single stack must be sealed or unsealed. Mixing sealed and unsealed
l
envelopes in a stack will cause a jam in the moistener.
Pitney Bowes Quick Start Guide April 2022 18