About The Range Of A Target's Change - Boss GX-100 Parameter Manual

CTL/EXP
BASS TOUCH WAH
BASS PEDAL BEND
* You can't assign MIDI parameters to the [1]–[4] knobs in "KNOB SETTING".

About the Range of a Target's Change

The value of the parameter selected as the target changes within the range defined by "Min" and "Max," as set on the GX-100.
When using an external footswitch, or other controller that acts as an on/off switch, "Min" is selected with Off (CLOSED), and "Max"
is selected with On (OPEN).
When using an external expression pedal or other controller that generates a consecutive change in the value, the value of the
setting changes accordingly, within the range set by the minimum and maximum values. Also, when the target is of an on/off
type, the median value of the received data is used as the dividing line in determining whether to switch it on or off.
110
CATEGORY
BASS OCTAVE
BASS SLOW GEAR
BASS DEFRETTER
BASS S-BEND
BASS WAH
MASTER
TUNER
MIDI *
TARGET
2: B³
2: B
ON/OFF
-2 OCT
-1 OCT
DIRECT LEVEL
ON/OFF
SENS
RISE TIME
LEVEL
ON/OFF
SENS
ATTACK
TONE
EFFECT LEVEL
DIRECT MIX
ON/OFF
FILTER MODE
POLARITY
SENS
FREQUENCY
RESONANCE
DECAY
EFFECT LEVEL
DIRECT MIX
ON/OFF
TRIGGER
PITCH
RISE TIME
FALL TIME
ON/OFF
PEDAL POSITION
PEDAL MIN
PEDAL MAX
EFFECT LEVEL
DIRECT MIX
ON/OFF
PITCH MIN
PITCH MAX
PEDAL POSITION
EFFECT LEVEL
DIRECT MIX
MEMORY LEVEL
BPM
KEY
INPUT SETTING
AMP CTL1
AMP CTL2
ON/OFF
MIDI CC#
MIDI PC#