Pitch Shifter - Boss GX-100 Parameter Manual

PITCH SHIFTER

This effect changes the pitch of the original sound (up or down) within a range of two octaves.
Parameter Value
ON/OFF OFF, ON
Selects the number of voices for the pitch shift sound.
1 VOICE
2 MONO
VOICE
2 STEREO
1: PITCH -24–+24
2: PITCH
1: FINE -50–+50
2: FINE
1: MODE FAST, MEDIUM,
2: MODE SLOW, MONO
0–300 ms, BPM
ŀ–Ō
1: PRE-
DELAY
2: PRE-
DELAY
1: 0–100
FEEDBACK
1: LEVEL 0–100
2: LEVEL
DIRECT 0–100
LEVEL
40–250
BPM
Chain
Turns this effect on/off.
One-voice pitch-shifted sound output in mono.
Two-voice pitch-shifted sound (PS1, PS2) output in mono.
Two-voice pitch-shifted sound (PS1, PS2) output through left and right channels.
Adjusts the amount of pitch shift (the amount of interval) in semitone steps.
Make fine adjustments to the interval. The amount of the change in the Fine 100 is equivalent to
that of the Pitch 1.
The response is slower in the order of FAST, MEDIUM and SLOW, but the modulation is lessened
in the same order.
Adjusts the time from when the direct sound is heard until the pitch shifted sounds are heard.
Normally you can leave this set at 0 ms.
* When set to BPM, the value of each parameter will be set according to the value of the
"MASTER BPM" specified for each memory. This makes it easier to achieve effect sound
settings that match the tempo of the song.
* If, due to the tempo, the time is longer than the range of allowable settings, it is then
synchronized to a period either 1/2 or 1/4 of that time.
Adjusts the feedback amount of the pitch shift sound.
Adjusts the volume of the pitch shifter.
Adjusts the volume of the direct sound.
Adjusts the BPM value for each memory.
* BPM (beats per minute) indicates the number of quarter note beats that occur each minute.
* When you have an external MIDI device connected, the MASTER BPM synchronizes to the
external MIDI devices tempo, making it impossible to set the MASTER BPM. To enable
setting of the MASTER BPM, set "SYNC CLOCK" to "INTERNAL".
Palette
Explanation
EFFECTS
33