Script Phaser - Boss GX-100 Parameter Manual

EFFECTS

SCRIPT PHASER

Models the MXR Phase 90 which was manufactured during the '70s.
Parameter Value
ON/OFF OFF, ON Turns this effect on/off.
0–100, Adjusts the frequency (speed) of the volume change.
BPM ŀ–Ō
RATE
DEPTH 0–100 Determines the depth of the phaser effect.
EFFECT 0–100 Adjusts the volume of the phaser.
LEVEL
DIRECT MIX 0–100 Adjusts the volume of the direct sound.
40–250 Adjusts the BPM value for each memory.
BPM
* Company names and product names appearing in this document are registered trademarks or trademarks of their respective
owners.
24
Chain
* When set to BPM, the value of each parameter will be set according to the value of the "MASTER
BPM" specified for each memory. This makes it easier to achieve effect sound settings that match
the tempo of the song.
* If, due to the tempo, the time is longer than the range of allowable settings, it is then
synchronized to a period either 1/2 or 1/4 of that time.
* BPM (beats per minute) indicates the number of quarter note beats that occur each minute.
* When you have an external MIDI device connected, the MASTER BPM synchronizes to the external
MIDI devices tempo, making it impossible to set the MASTER BPM. To enable setting of the
MASTER BPM, set "SYNC CLOCK" to "INTERNAL".
Palette
Explanation