Bass Chorus - Boss GX-100 Parameter Manual

BASS CHORUS

This is a chorus effect for bass.
Parameter Value
ON/OFF OFF, ON
MONO
TYPE
STEREO
0–100, BPM
ŀ–Ō
RATE
DEPTH 0–100
EFFECT 0–100
LEVEL
FLAT, 20.0
LOW CUT
Hz–12.5 kHz
20.0 Hz–12.5
HIGH CUT
kHz, FLAT
DIRECT 0–100
LEVEL
40–250
BPM
Chain
Turns this effect on/off.
This chorus effect outputs the same sound from both L channel and R channel.
This is a stereo chorus effect that adds different chorus sounds to L channel and R channel.
Adjusts the rate of the chorus effect.
* When set to BPM, the value of each parameter will be set according to the value of the
"MASTER BPM" specified for each memory. This makes it easier to achieve effect sound
settings that match the tempo of the song.
* If, due to the tempo, the time is longer than the range of allowable settings, it is then
synchronized to a period either 1/2 or 1/4 of that time.
Adjusts the depth of the chorus effect. To use this as a doubling effect, set this to "0".
Adjusts the volume of the effect sound.
Sets the frequency at which the low cut filter begins to take effect. When "FLAT" is selected, the low
cut filter has no effect.
Sets the frequency at which the high cut filter begins to take effect. When "FLAT" is selected, the
high cut filter has no effect.
Adjusts the volume of the direct sound.
Setting this to "0" cuts the direct sound.
Adjusts the BPM value for each memory.
* BPM (beats per minute) indicates the number of quarter note beats that occur each minute.
* When you have an external MIDI device connected, the MASTER BPM synchronizes to the
external MIDI devices tempo, making it impossible to set the MASTER BPM. To enable setting
of the MASTER BPM, set "SYNC CLOCK" to "INTERNAL".
Palette
Explanation
EFFECTS
73