Other Patch Settings; Adjusting The Patch Volume; Switching Phrases At The End Of The Loop (Phrase Change Mode); Adjusting The Time Used To Fade In (Fade-In Time) - Boss RC-50 Owner's Manual

Other Patch Settings

These procedures are for making other patch settings.
fig.04-160
2 3 5 1
1.
Press [NAME/PATCH] twice.
2.
Press PARAMETER [
you want to set.
fig.04-170d
(Example)
3.
Rotate the PATCH/VALUE dial to adjust the parameter.
4.
Repeat Steps 2–3 as needed.
5.
When finished making the settings, press [EXIT] to return to
the Play screen.
] [ ] to display the parameter
Making the Patch Settings

Adjusting the Patch Volume

You can adjust the overall patch volume. This is convenient when
you want to connect an external EXP pedal and use the pedal to
control the volume or adjust the output volume for both the MAIN
OUTPUT and SUB OUTPUT jacks simultaneously.
Normally, this is set to the center with a level of 100.
fig.04-180d
Available Settings: 0–200
Switching Phrases at the End of the
Loop (Phrase Change Mode)
You can select the method used for switching patches in Single mode
and Multi mode and switching the current phrase in Single mode
(Phrase Change mode).
fig.04-190d
Available Settings Description
When a switch in patches or the current phrase is
carried out, recording or playback of the next
IMMEDIATE
designated patch or current phrase begins im-
mediately.
When a switch in patches or the current phrase is
carried out, recording or playback of the next
designated patch or phrase begins once the end
LOOP END
of the current phrase (length of the current loop
when Loop Sync is on in Multi mode) is reached.
Adjusting the Time Used to Fade In
(Fade-In Time)
This adjusts the fade-in time when the phrase is set to fade in upon
playback.
fig.04-210d
Available Settings: 0–100
Adjusting the Time Used to Fade
Out (Fade-Out Time)
This procedure adjusts the fade out when playback of a phrase is set
to fade out before stopping.
fig.04-200d
Available Settings: 0–100
49