Phaser - Boss GX-100 Parameter Manual

Hide thumbs Also See for GX-100:
Table of Contents

Advertisement

PHASER

Gives a whooshing, swirling character to the sound by adding varied-phase portions to the direct sound.
Parameter
Value
ON/OFF
OFF, ON
4 STAGE,
STAGE
8 STAGE, 12
STAGE
0–100, BPM ŀ–
Ō
RATE
DEPTH
0–100
0–100
RESONANCE
MANUAL
0–100
OFF, 0–100,
BPM ŀ–Ō
STEP RATE
EFFECT
0–100
LEVEL
DIRECT MIX 0–100
40–250
BPM
Chain
Turns this effect on/off.
Select the number of stages for the phaser effect.
Adjusts the frequency (speed) of the volume change.
* When set to BPM, the value of each parameter will be set according to the value of the
"MASTER BPM" specified for each memory. This makes it easier to achieve effect sound
settings that match the tempo of the song.
* If, due to the tempo, the time is longer than the range of allowable settings, it is then
synchronized to a period either 1/2 or 1/4 of that time.
Determines the depth of the phaser effect.
Determines the amount of resonance (feedback). Increasing the value emphasizes the effect, for
a more unusual sound.
Adjusts the center frequency of the phaser effect.
This sets the cycle of the step function that changes the rate and depth. When it is set to a higher
value, the change will be finer. Set this to "OFF" when not using the Step function.
* When set to BPM, the value of each parameter will be set according to the value of the
"MASTER BPM" specified for each memory. This makes it easier to achieve effect sound
settings that match the tempo of the song.
* If, due to the tempo, the time is longer than the range of allowable settings, it is then
synchronized to a period either 1/2 or 1/4 of that time.
Adjusts the volume of the phaser.
Adjusts the volume of the direct sound.
Adjusts the BPM value for each memory.
* BPM (beats per minute) indicates the number of quarter note beats that occur each minute.
* When you have an external MIDI device connected, the MASTER BPM synchronizes to the
external MIDI devices tempo, making it impossible to set the MASTER BPM. To enable
setting of the MASTER BPM, set "SYNC CLOCK" to "INTERNAL".
Palette
Explanation
EFFECTS
23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents