Bass Overdrive - Boss GX-100 Parameter Manual

BASS OVERDRIVE

Overdrive tuned especially for use with basses.
This is an overdrive that uses MDP to obtain the distortion that's most appropriate in each pitch range.
Parameter Value
OFF, Turns this effect on/off.
ON/OFF
ON
DRIVE 0–120 Adjusts the depth of distortion.
-50– Adjusts the tone.
TONE
+50
LEVEL 0–100 Adjusts the volume of the effect sound.
-50– Adjusts the tone for the low frequency range. Turning this to the left (counterclockwise) produces a sound
BOTTOM
+50 with the low end cut; turning it to the right boosts the low end in the sound.
DIRECT MIX 0–100 Adjusts the volume of the direct sound.
OFF, Switches to a tone that is suitable for solos.
SOLO SW
ON
SOLO 0–100 Adjusts the volume level when the SOLO SW is ON.
LEVEL
Chain Palette
Explanation
EFFECTS
67