Metal Distortion - Boss GX-100 Parameter Manual

EFFECTS

METAL DISTORTION

This is distortion sound that is ideal for performances of heavy riffs.
Parameter Value
ON/OFF OFF, ON Turns this effect on/off.
METAL This is distortion sound that is ideal for performances of heavy riffs.
DS
METAL This models the sound of the BOSS MT-2.
ZONE It produces a wide range of metal sounds, from old style to slash metal.
TYPE
This models the sound of the BOSS HM-2.
HM-2
It produces distinctive cranked-up distortion sound with compression.
METAL This models the sound of the BOSS ML-2.
CORE The effect lets you create the optimal sound for playing high-speed metal riffs.
DIST 0–120 Adjusts the depth of distortion.
TONE -50–+50 Adjusts the tone.
LEVEL 0–100 Adjusts the volume of the effect sound.
-50–+50 Adjusts the tone for the low frequency range. Turning this to the left (counterclockwise) produces a
BOTTOM
sound with the low end cut; turning it to the right boosts the low end in the sound.
DIRECT MIX 0–100 Adjusts the volume of the direct sound.
SOLO SW OFF, ON Switches to a tone that is suitable for solos.
SOLO 0–100 Adjusts the volume level when the SOLO SW is ON.
LEVEL
12
Chain Palette
Explanation