Use Of The Product - Jimmy HW10 Manual

3 in 1 full house cleaning cordless vacuum&washer

Hide thumbs

Table Of Contents

Table of Contents

Place machine to charging base(Fig 7)

To put machine back to charging base, hold

machine handle to lift the machine,, aim charging

slot on bottom of machine to the charging

socket on charging base and put the machine

into charging base. To use the machine, hold

machine handle and lift out machine from

charging base.

D i r t y w a t e r t a n k a s s e m b l y a n d

disassembly

To take off dirty water tank, hold machine with

one hand and hold dirty water tank with another

hand, press dirty water tank release button to

pull out dirty water tank. (Fig 8-1)

To assemble dirty water tank, place dirty water

tank bottom into mainbody, push dirty water tank

towards mainbody until a "click" sound is heard.

(Fig 8-2)

B r u s h r o l l w i n d o w a n d b r u s h r o l l

assembly and disassembly

To take off brushroll window, hold brushroll window

latch and pull upward to remove brushroll window.

To assemble brushroll window, align the clips on two

sides of brushroll window with the slots on two sides of

floorhead. Press brushroll window down until a "click"

sound is heard. (Fig 9)

To disassemble the brushroll, pull the brushroll

cap outward to take out brushrol. To assemble the

brushroll, hold brushroll cap, slide brushroll over the

cylinder until brushroll reaches the end. (Fig 10)

C l e a n w a t e r t a n k a s s e m b l y a n d

disassembly

To take off clean water tank, hold the clean water

tank handle and pull out the clean water tank. To

assemble clean water tank, put the clean water

tank back to nozzle, align with the brushroll window.

(Fig 11)