Alarms Relating To The Internal Storage - Sony PZW-4000 Service Manual

Log Alarm message in
status display area
W20-040 Power Unit(A) Err!
W20-041 Power Unit(B) Err!
W20-042 Power Unit(A) AC Err!
W20-043 Power Unit(B) AC Err!
W20-050 IT Flash1 Warning
W20-051 IT Flash2 Warning
W20-052 IO Flash Warning

2-3-9. Alarms Relating to the Internal Storage

Log Alarm message in
status display area
W40-070 Low Capacity (Int)
W70-013 SSD1 Lifetime
W70-014 SSD2 Lifetime
W70-016 SSD1 Warning
W70-017 SSD2 Warning
W70-024 SSD1 Fail
W70-025 SSD2 Fail
W70-030 Rebuilding xx%
W70-040 SSDIF1 Err
W70-041 SSDIF2 Err
W80-025 Update SSD FW!
Alarm message in video monitor screen
POWER SUPPLY UNIT(A) STATUS IS NOT
NORMAL.
PLEASE CONTACT SERVICE.
POWER SUPPLY UNIT(B) STATUS IS NOT
NORMAL.
PLEASE CONTACT SERVICE.
AC POWER IS NOT SUPPLIED TO THE
POWER SUPPLY UNIT(A).
AC POWER IS NOT SUPPLIED TO THE
POWER SUPPLY UNIT(B).
IT IS NECESSARY TO REPLACE IT FLASH1.
PLEASE CONTACT SERVICE.
IT IS NECESSARY TO REPLACE IT FLASH2.
PLEASE CONTACT SERVICE.
IT IS NECESSARY TO REPLACE IO FLASH.
PLEASE CONTACT SERVICE.
Alarm message in video monitor screen
—
SSD1 LIFETIME HAS ENDED.
PLEASE CONTACT SERVICE.
SSD2 LIFETIME HAS ENDED.
PLEASE CONTACT SERVICE.
ERRORS OCCUR FREQUENTLY WHILE
READING/WRITING SSD1.
PLEASE CONTACT SERVICE.
ERRORS OCCUR FREQUENTLY WHILE
READING/WRITING SSD2.
PLEASE CONTACT SERVICE.
SSD1 FAIL.
PLEASE CONTACT SERVICE.
SSD2 FAIL.
PLEASE CONTACT SERVICE.
REBUILDING NOW.
PLEASE DO NOT TURN OFF.
SSDIF1 LINK SPEED DOWN.
CANNOT USE INTERNAL STORAGE.
SSDIF2 LINK SPEED DOWN.
CANNOT USE INTERNAL STORAGE.
NEW FIRMWARE FOR THE SSD IS
AVAILABLE.
RUN SOFTWARE UPDATE PROGRAM.
Description/action
An error was detected in the power supply unit (A).
Note
The unit will not stop operating, but if you continue
to use it in this state, temperatures inside the unit
will rise, possibly resulting in failure or fire.
An error was detected in the power supply unit (B).
Note
The unit will not stop operating, but if you continue
to use it in this state, temperatures inside the unit
will rise, possibly resulting in failure or fire.
AC power is not supplied to the power supply unit
(A).
Connect AC power to the power supply unit (A).
AC power is not supplied to the power supply unit
(B).
Connect AC power to the power supply unit (A).
The unit will operate, but if you continue to use it,
the memory of the unit may be damaged and all
information may be lost.
The unit will operate, but if you continue to use it,
the memory of the unit may be damaged and all
information may be lost.
The unit will operate, but if you continue to use it,
the memory of the unit may be damaged and all
information may be lost.
Description/action
The internal storage has low remaining free space.
Delete any unwanted clips.
The lifetime of SSD (1) has come to an end. The
SSD must be replaced.
The lifetime of SSD (2) has come to an end. The
SSD must be replaced.
Errors are occurring frequently when reading or
writing an SSD (1). The SSD must be replaced.
Errors are occurring frequently when reading or
writing an SSD (2). The SSD must be replaced.
The SSD (1) malfunctions.
The SSD must be replaced.
The SSD (2) malfunctions.
The SSD must be replaced.
Data is being rebuilt.
Do not power the unit off until the rebuild has
finished.
The unit found that the interface of SSD (1) is
abnormal.
The internal storage cannot be used.
The unit found that the interface of SSD (2) is
abnormal.
The internal storage cannot be used.
The firmware for the internal storage must be
updated.
Update the software version.
32