Table of Contents
Advertisement
Installation
1.
Align the two notches of the CPU with the two projections on the CPU socket, and then seat the CPU.
2.
Attach the insulating sheet, the bracket and the CPU retainer.
3.
Put four compression springs and four hexagon supports on the CPU retainer.
4.
Press the CPU retainer and tighten the hexagon supports temporarily in diagonal sequence.
5.
Tighten the hexagon supports to the specified torque in the following sequence: (a) to (d).
Hexagon supports
(M3)
Compression
springs
(b)
CPU retainer
(d)
(a)
(c)
CPU
iAP-005 CPU board
Insulating sheet
Bracket
Notch
CPU
Notch
Projection
Projection
CPU socket
146
Advertisement
Table of Contents
