During Recording Operations; During Playback Operations - Sony PZW-4000 Service Manual

2-3-4. During Recording Operations

Log Alarm message in
status display area
W10-030 Input Sig!
W10-031 ILL. REC!
W40-041 MEM. Full!
W40-071 REC STOP WITHIN
2MIN.
W40-072 REC STOP WITHIN
2MIN.
W60-041 REC ERR!
—
PORT SELECT mismatch.
Select REC Port.

2-3-5. During Playback Operations

Log Alarm message in
status display area
W10-042 MEM. Empty!
W10-050 ILL. PLAY!
W60-023 Media Data Error!
—
Clip is Locked.
Alarm message in video monitor screen
VIDEO INPUT SIGNAL DOES NOT
MATCH SYSTEM FREQUENCY.
ENCODING DOES NOT SYNCHRONIZE
WITH REF VIDEO.
MEMORY FULL !!
RECORDING IS TERMINATED WITHIN 2
MINUTES AUTOMATICALLY. BECAUSE
THE CLIP IS REACHED TO MAXIMUM
DURATION.
RECORDING IS TERMINATED WITHIN 2
MINUTES AUTOMATICALLY. BECAUSE
OF INTERNAL LIMITATION.
RECORDING ERROR DETECTED.
Alarm message in video monitor screen
MEMORY EMPTY !!
ILLEGAL PLAYBACK.
MEDIA DATA ERROR DETECTED.
Description/action
A signal that does not match the system frequency
is input.
Input a signal that matches the system frequency,
or change this unit's system frequency setting.
Check the signals being input to this unit.
Recording on a media is not possible because a
buffer overflow has occurred in the recording
buffer memory.
Check the disc to be recorded on this unit.
The length of the clip has reached the maximum
limit during recording. Recording will stop within
the next two minutes.
The length of the clip has reached the maximum
limit during recording. Recording will stop within
the next two minutes.
An unrecoverable error was detected during
recording. A part of the recorded clip is missing.
An attempt was made to carry out a recording
operation when the playback port is selected.
Select the recording port.
Description/action
Playback is not possible because a buffer
underflow has occurred in the playback buffer
memory.
Normal playback is not possible.
A media error has been detected.
Replace the media.
The clip is locked (protected).
Displayed when an attempt is made to set a shot
mark when the clip is locked.
28